Ice
Equipment International
Carving Block Maker CB300X2
Produces a Crystal Clear block of ice for sculptures.
A pleasure for the carver to work with and a delightful product for your customer.
Blocks of ice are frozen in a plastic liner
and then placed inside a cardboard box for storage and handling.
Each unit will produce two blocks of ice every
3-4 days. The recommended ambient temperature for maximum productivity is
72 degrees F. (Cold temperatures can cause cracking in the blocks and much
warmer temperatures may slow the freezing cycle).
Using the Clinebell Hoist and Lift Cart, two
blocks of ice can be removed and the machine refilled within 30 minutes or less,
by one person.
For special effects, freeze flowers wedding vows, or just
about anything imaginable into the block of ice.
Create a colored block of ice by using a food coloring mixture.
A stainless steel lifter plate is frozen approximately 1/4"
into each end of the block to help lift the finished block from the chamber.
A pump circulates the water to keep impurities from freezing
into the block of ice. Excess water and impurities are removed from the top
of the block prior to harvesting by use of a common wet and dry vacuum.
Proper placement of the pump is critical to
the clarity of the ice. Each day of the freezing cycle the position of the
pump must be changed for continued ice clarity.
Top view
11-lb. Block Ice Makers
MODEL B56 SERIES
Produces 56 blocks of ice per day.
Lets you freeze blocks in Polyethylene bags.
No Glycol solution. No circulating pump. No ice cans needed.
No messy harvest tank. No defrosting. Blocks are hard frozen
when taken to the freezer.
Bags of water are placed between refrigerated plates inside
the cabinet for freezing.
56 bags can be filled with water and loaded into cabinet in
20 minutes or less, by one person.
56 11-LB blocks of ice are produced each day using one 1-1/2hp condensing
unit. Two 1-1/2 hp condensing units or one 3-hp condensing unit will net 56
blocks twice per day.
This process provides a more cost effective and sanitary end
product.
The cabinet is designed for remote installation.
The bag fill device is available as an accessory.
Call for Information
1-800-463-4333
or 613-386-7381
or
Click
Here to Request More Information
